Daytime Running Lights - If Equipped; High/Low Beam Switch; Flash-To-Pass; Automatic Headlights - If Equipped - Jeep GLADIATOR 2020 User Manual

Hide thumbs Also See for GLADIATOR 2020:
Table of Contents

Advertisement

Headlight Switch
1 — Headlight Switch
2 — Ambient Light Dimmer Control
3 — Instrument Panel Dimmer Control
4 — Cargo Light
5 — Front Fog Light
Rotate the headlight switch clockwise to the
first detent for parking light and instrument
panel light operation. Rotate the headlight
switch to the second detent for headlight,
parking light, and instrument panel light
operation.
Daytime Running Lights — If Equipped
The Daytime Running Lights (DRLs) are in a
dedicated position below the headlight
assembly. DRLs are active when the Low
Beams are not on, and when the vehicle is
shifted into any position other than PARK
(Automatic Transmission), or when the
vehicle begins to move (Manual Transmis-
sion).
NOTE:
The DRLs, on the same side of the vehicle as
the active turn signal, will turn off automati-
cally when a turn signal is in operation and
turn on again when the turn signal is not
operating.

High/Low Beam Switch

The High/Low Beam Switch is located within
the Multifunction Lever on the left side of
the steering wheel. High beam headlights
can be used for improved visibility in low lit
areas when there is no oncoming traffic.
Otherwise, it is recommended to use the low
beam headlights to reduce glare to other
vehicles.
With the headlight switch activated, push
the Multifunction Lever toward the instru-
ment panel to switch the headlights to high
beams. The lever will return to the centered
position. To return the headlights to low
beam, pull the lever toward the steering
wheel, or push the lever toward the instru-
ment panel.
Multifunction Lever

Flash-To-Pass

The Flash-To-Pass feature will illuminate the
high beam headlights temporarily to signal
another vehicle of a passing occurrence. Pull
and hold the Multifunction Lever to activate
the Flash-To-Pass feature. When the lever is
released, the Flash-To-Pass feature will
deactivate.
Automatic Headlights — If Equipped
The Automatic Headlight System will turn
the headlights on or off according to ambient
light levels. To turn the system on, rotate the
headlight switch clockwise to the last detent
for automatic headlight operation. When the
system is on, the headlight time delay
feature is also on. This means the headlights
will stay on for up to 90 seconds after you
29

Advertisement

Table of Contents
loading

Table of Contents