Table of Contents
Advertisement
106
GETTING TO KNOW YOUR INSTRUMENT PANEL
•
The top line where Reconfigurable Telltales, Com-
pass Direction, Outside Temperature, Time, Range,
MPG or Trip are displayed. This also displays the
speedometer when other menu pages are
displayed.
•
The main display area where the menus and pop up
messages are displayed.
•
The lower line where reconfigurable telltales, menu
name and menu page are displayed.
The system allows the driver to select information by
pushing the following buttons mounted on the steering
wheel:
Instrument Cluster Display Control Buttons
1 — Left Arrow Button
2 — Up Arrow Button
3 — Right Arrow Button
4 — Down Arrow Button
5 — OK Button
•
Left Arrow Button
Push and release the left
arrow button to
access the information screens or submenu screens
of a main menu item.
•
Up Arrow Button
Push and release the up
arrow button to scroll
upward through the Main Menu items.
Right Arrow Button
•
Push and release the right
arrow button to
access the information screens or submenu screens
of a main menu item.
Down Arrow Button
•
Push and release the down
arrow button to
scroll downward through the Main Menu items.
OK Button
•
Push the OK button to access/select the informa-
tion screens or submenu screens of a Main Menu
item. Push and hold the OK arrow button for two
seconds to reset displayed/selected features that
can be reset.
OIL CHANGE RESET — IF EQUIPPED
Use this QR code to access your digital
experience.
Your vehicle may be equipped with an
engine oil change indicator system. The
"Oil Change Required" message will dis-
play in the instrument cluster display for
five seconds after a single chime has sounded to indi-
cate the next scheduled oil change interval. The engine
oil change indicator system is duty cycle based, which
means the engine oil change interval may fluctuate,
dependent upon your personal driving style.
Unless reset, this message will continue to display each
time you place the ignition in the ON/RUN position. To
turn off the message temporarily, push and release the
OK button. To reset the oil change indicator system
(after performing the scheduled maintenance), refer to
the following procedure.
Oil Life Reset
1. Without pushing the brake pedal, place the ignition
in the ON/RUN mode (do not start the engine).
2. Navigate to "Oil Life" submenu in "Vehicle Info" in the
instrument cluster display.
3. Push and hold the OK button until the gauge resets
to 100%.
Secondary Method For Oil Change Reset Procedure
1. Without pushing the brake pedal, place the ignition
in the ON/RUN position (do not start the engine).
2. Fully press the accelerator pedal, slowly, three times
within ten seconds.
3. Without pushing the brake pedal, place the ignition
in the OFF position.
NOTE:
If the indicator message illuminates when you start the
vehicle, the oil change indicator system did not reset. If
necessary, repeat this procedure.
Scan me
Advertisement
Table of Contents
