Jack Location
The jack and jack tools are stored under the
right rear seat. To remove jack and tools
proceed as follows:
1. Fold up the right rear seat.
2. Remove the jack and tools by turning the
wing bolt counterclockwise, remove the
wing bolt and then lift the assembly out
from under the seat.
Jack And Tools
3. Release the tool bag straps from the jack
and remove tools from bag.
184
Jack And Tool Bag
4. Remove tool kit and assemble tools.
Jack And Tool Bag
There are two ways to assemble the tools:
Assembled For Spare Tire Lowering/Raising
1 — Lug Wrench
2 — Long Extension Without Spring Clip 2
3 — Long Extension With Spring Clip 3
4 — Long Extension With Spring Clip 4
NOTE:
If the tailgate is lowered, the jack extension
with hook can be added to this assembly to
enable lowering of the spare tire without
having to raise the tailgate.
CAUTION!
The lug wrench can only be attached to
extension 2.
(Continued)