Oil Change Reset - If Equipped; Instrument Cluster Display Selectable Items - Jeep Wrangler Owner's Manual

 Right arrow button
Push and release the right arrow button to access
the information screens or submenu screens of a main
menu item.
 Down arrow button
Push and release the down arrow button to scroll
downward through the Main Menu items.
 OK Button
Push the OK button to access/select the information
screens or submenu screens of a Main Menu item.
Push and hold the OK arrow button for two seconds to
reset displayed/selected features that can be reset.
O C R — I E
IL HANGE ESET F
Your vehicle may be equipped with an engine oil change
indicator system. The "Oil Change Due" message will
display for approximately five seconds after a single chime
has sounded, to indicate the next scheduled oil change
interval has been reached. The engine oil change indicator
system is duty cycle based, which means the engine oil
change interval may fluctuate due to ambient
temperatures, engine warm-up and personal driving style.
Unless reset, this message will continue to display each
time you place the ignition in the ON/RUN position. To turn
off the message temporarily, push and release the OK
button. To reset the oil change indicator system (after
performing the scheduled maintenance), refer to the
following procedure.
Oil Life Reset
1. Without pushing the brake pedal, place the ignition
in the ON/RUN mode (do not start the engine).
2. Navigate to "Oil Life" submenu in "Vehicle Info" in the
instrument cluster display.
3. Push and hold the OK button until the gauge resets to
100%.
QUIPPED
Secondary Method For Oil Change Reset Procedure
1. Without pushing the brake pedal, place the ignition
in the ON/RUN position (do not start the engine).
2. Fully press the accelerator pedal, slowly, three times
within ten seconds.
3. Without pushing the brake pedal, place the ignition in
the OFF position.
NOTE:
If the indicator message illuminates when you start the
vehicle, the oil change indicator system did not reset. If
necessary, repeat this procedure.
GETTING TO KNOW YOUR INSTRUMENT PANEL
I C D
NSTRUMENT LUSTER
S I
ELECTABLE TEMS
The instrument cluster display can be used to view the
following main menu items:
NOTE:
Depending on the vehicles options, feature settings may
vary.
Speedometer Stop/Start
Vehicle Info Audio
Off Road Messages
Driver Assist — If Equipped Screen Setup
Trip Info Settings
Fuel Economy Phone Call Status
Speedometer
Push and release the up or down
the speedometer menu title is displayed in the instrument
cluster display. Push and release the OK button to toggle
between mph and km/h.
75
ISPLAY
arrow button until