Hazard Warning Flashers; Assist And Sos System - If Equipped - Jeep GLADIATOR 2020 User Manual

Hide thumbs Also See for GLADIATOR 2020:
Table of Contents

Advertisement

HAZARD WARNING
FLASHERS
The Hazard Warning flashers switch is
located on the instrument panel below the
climate controls.
Push the switch to turn on the
Hazard Warning flashers. When the
switch is activated, all directional
turn signals will flash on and off to
warn oncoming traffic of an emergency. Push
the switch a second time to turn off the

Hazard Warning flashers.

This is an emergency warning system and it
should not be used when the vehicle is in
motion. Use it when your vehicle is disabled
and it is creating a safety hazard for other
motorists.
When you must leave the vehicle to seek
assistance, the Hazard Warning flashers will
continue to operate even though the ignition
is placed in the OFF position.
NOTE:
With extended use the Hazard Warning
flashers may wear down your battery.
ASSIST AND SOS SYSTEM —
IF EQUIPPED
Assist And SOS Buttons
1 — ASSIST Button
2 — SOS Button
If equipped, the overhead console contains
an ASSIST and an SOS button.
WARNING!
ALWAYS
obey
traffic
laws
attention to the road. ALWAYS drive safely
with your hands on the steering wheel. You
have full responsibility and assume all
risks related to the use of the features and
applications in this vehicle. Only use the
features and applications when it is safe to
do so. Failure to do so may result in an
accident involving serious injury or death.
NOTE:
Your vehicle may be transmitting data as
authorized by the subscriber.
The SOS and ASSIST buttons will only
function if you are connected to an oper-
able LTE (voice/data) or 4G (data)
network. Other Uconnect services will only
be operable if your SiriusXM Guardian™
service is active and you are connected to
an operable LTE (voice/data) or 4G (data)
network.
and
pay
169

Advertisement

Table of Contents
loading

Table of Contents