Table of Contents
Advertisement
The instrument cluster display menu items may
consist of the following:
Speedometer
Vehicle Info
Fuel Economy
Trip Info
Audio
Messages
Speed
Warning
The system allows the driver to select information
by pushing the following buttons mounted on the
steering wheel:
Instrument Cluster Display Control Buttons
1 — Left Arrow Button
2 — Up Arrow Button
Driver Assist —
3 — Right Arrow Button
If Equipped
4 — Down Arrow Button
Stop/Start
5 — OK Button
Screen Setup
Up And Down Arrow Buttons:
Using the up
you to cycle through the Main Menu Items.
Changes the Main Screen area and Menu Title
area.
Left And Right Arrow Buttons:
Using the left
you to cycle through the submenu items of the
Main menu item.
NOTE:
Holding the up
arrow button will loop the user through the
currently selected menu or options presented
on the screen.
Upon returning to a main menu, the last
submenu screen viewed within that main menu
will be displayed.
OK Button
Push the OK button to access/select the infor-
mation screens or submenu screens of a main
or down
arrow buttons allow
or right
arrow buttons allow
/ down
or left
/right
GETTING TO KNOW YOUR INSTRUMENT PANEL
menu item. To reset displayed/selected
features push and hold the OK button for two
seconds.
O
L
R
— I
E
IL
IFE
ESET
F
QUIPPED
Your vehicle may be equipped with an engine oil
change indicator system. The "Oil Change
Required" message will display in the instrument
cluster display for five seconds after a single chime
has sounded to indicate the next scheduled oil
change interval. The engine oil change indicator
system is duty cycle based, which means the
engine oil change interval may fluctuate,
dependent upon your personal driving style.
Unless reset, this message will continue to display
each time you place the ignition in the ON/RUN
position. To turn off the message temporarily, push
and release the OK button. To reset the oil change
indicator system (after performing the scheduled
maintenance), refer to the following procedure.
Oil Life Reset
1. Without pushing the brake pedal, place the
ignition in the ON/RUN mode (do not start the
engine).
2. Navigate to "Oil Life" submenu in "Vehicle
Info" in the instrument cluster display.
3. Push and hold the OK button until the gauge
resets to 100%.
75
3
Advertisement
Table of Contents
