Table of Contents
Advertisement
CAUTION!
Do not attempt to raise the vehicle by
jacking on locations other than those
indicated.
1. Remove the spare tire, jack and tools
from the stored location.
2. Loosen (but do not remove) the wheel lug
nuts by turning them counterclockwise
one turn while the wheel is still on the
ground.
3. Assemble the jack and jacking tools.
Connect the jack handle driver to the
extension, then to the lug wrench.
Assembled Jack And Tools
188
4. Operate the jack from the front or the rear
of the vehicle. Place the jack under the
axle tube, as shown. Do not raise the
vehicle until you are sure the jack is fully
engaged.
Front Jack Lifting Point
Front Jacking Location
Rear Jack Lifting Point
Rear Jacking Location
Advertisement
Table of Contents
