Creating Presets; Selecting Presets; Renaming Presets - Pitney Bowes SendPro C Operator's Manual

Creating Presets

A Preset is a snapshot of commonly-used meter settings that allows you to easily recall the properties
you use most often. Assigning a preset, such as First Class letter, saves time and ensures accuracy in
your mail. The maximum number of presets you can create is ten.
1. Tap Envelope Printing on the Home screen.
2. Define the settings you would like for your preset:
a. Tap the Account button.
b. Select the desired account.
c. Tap the Class button.
d. Tap Start Over.
e. Select the desired class and any additional services you may require. Confirm these by tapping
Apply.
f. If desired, tap Graphic to save a logo (Envelope Message). Select the desired Envelope
Message.
3. Tap the Preset button.
4. Tap the Save New Preset button.
5. Enter a name for the preset. You can enter up to 32 characters.
6. Tap the green tick when done.
Note: When your SendPro C, SendPro+ device enters sleep mode or is switched off it also retains your
last used settings.

Selecting Presets

1. Tap Envelope Printing on the Home screen.
2. Tap the Preset button.
3. Tap the desired preset.
4. Tap the < button to return to the Home screen.

Renaming Presets

1. Tap Envelope Printing on the Home screen.
2. Tap the Preset button.
Pitney Bowes Operator Guide July 2019
Presets
45