QUANTA QuantaGrid Series User Manual page 75

BMC
you want to display in the list. Some examples of other sensors include Temperature Sen-
sors, Fan Sensors, and Voltage Sensors etc.
Select a particular sensor from the list. On the right hand side of the screen you can view
the Thresholds for this sensor.
Thresholds are of six types:
Lower Non-Recoverable (LNR)

Lower Critical (LC)

Lower Non-Critical (LNC)

Upper Non-Recoverable (UNR)

Upper Critical (UC)

Upper Non-Critical (UNC)

The threshold states could be Lower Non-critical - going low, Lower Non-critical - going
high, Lower Critical - going low, Lower Critical - going high, Lower Non-recoverable - going
low, Lower Non-recoverable - going high, Upper Non-critical - going low, Upper Non-criti-
cal - going high, Upper Critical - going low, Upper Critical - going high, Upper Non-recov-
erable - going low, Upper Non-recoverable - going high.
A graphical view of these events (Number of event logs vs. Thresholds) can be viewed as
shown in the Sensor Readings Page screenshot.
Live Widget
The widget window can be turned On and Off for a selected sensor. Widget provides a
dynamic representation of the readings for the sensor. The following image shows and
example widget:
Note:
Widgets are little gadgets, which provide real time information about a particular sensor. User
can track a sensor's behavior over a specific amount of time at specific intervals. The result will
be displayed as a line graph in the widget. The session will not expire, until the widgets gets a
live data of the last widget that is kept opened.
Figure 3-13. Widget Window
FRU I
NFORMATION
3-23