QUANTA QuantaGrid Series User Manual page 102

BMC
Table 21: SMTP Settings Page (Continued)
I
TEM
Username
Password
Secondary SMTP Server
Save
Reset
Procedure:
1. Select the LAN Channel Number from the dropdown list.
2. Enter the Sender Address in the specified field.
3. Enter the Machine Name in the specified field.
4. In Primary SMTP Server, enter the Server Address in the specified field.
5. Enable the check box SMTP Server requires Authentication if you want to authen-
ticate SMTP Server.
6. Enter your User name and Password in the respective fields.
7. In Secondary SMTP Server, enter the Server Address in the specific field.
8. Enable the check box SMTP Server requires Authentication if you want to authen-
ticate SMTP Server.
9. Enter your User name and Password in the respective fields.
10. Click Save to save the entered details.
11. Click Reset to update the entered details.
The username to access SMTP Accounts.
Note:
 User Name can be of length 4 to 64 alpha-numeric characters.
 It must start with an alphabet.
 Special characters ' , '(comma), ':'(colon), ';'(semicolon), ' '(space)
and '\'(backslash) are not allowed.
The password for the SMTP User Account.
Note:

Password must be at least 4 characters long.
 White space is not allowed.
 This field will not allow more than 20 characters if "20 Bytes"
option is chosen.
It lists the Secondary SMTP Server configuration. It is an optional field. If
the Primary SMTP server is not working fine, then it tries with Secondary
SMTP Server configuration.
To save the new SMTP server configuration.
To reset the modified changes.
C
ONFIGURATION
D
ESCRIPTION
G
ROUP
3-50