Snmp; Utc Timezone - QUANTA QuantaGrid Series User Manual

BMC
Note:
Maximum of two devices can be added in Floppy, CD/DVD and Hard disk drives.
2. Enable the Local Media Support if needed.
3. Click Save to save the changes made else click Reset to reset the previously saved
values.
Note:
If there are two device panels for each device, and when you click the Connect button, then
the redirected device panel will be disabled.

SNMP

This page is used to set the configuration for SNMP. User could set the SNMP community
string and trap in this page. It just display when the project support SNMP.
General support as below:
The following fields are displayed in this page.
Table 28: SNMP Settings
I
TEM
Enable SNMPv1/v2
Read-Only Community String
Read-Write Community String

UTC Timezone

Note:
The feature "UTC Timezone" used for port setting supported from Grantley platform.
The selection enable or disable the SNMP feature for query.
Display or set the read-only community string.
Display or set the read-write community string.
D
ESCRIPTION
SNMP
3-60