QUANTA QuantaGrid Series User Manual page 85

BMC
3. Enter the IP address of LDAP server in the IP Address field.
Note:
 IP Address made of 4 numbers separated by dots as in 'xxx.xxx.xxx.xxx' .
 Each Number ranges from 0 to 255.
 First Number must not be 0.
 Supports IPv4 Address format and IPv6 Address format.
4. pecify the LDAP Port in the Port field.
Note:
Default Port is 389. For Secure connection, default port is 636.
5. Enter the Search Base. The Search base tells the LDAP server which part of the
external directory tree to search. The search base may be something equivalent to
the organization, group of external directory.
Note:
 Searchbase is a string of 4 to 63 alpha-numeric characters.
 It must start with an alphabetical character.
 Special Symbols like dot (.), comma (,), hyphen(?]), underscore (_), equal-to (=) are
allowed.
 Example: ou=login,dc=domain,dc=com
6. Click Save to save the settings.
7. Click Cancel to cancel the modified changes.
To add a new Role Group
8. In the LDAP Settings Page, select a blank row and click Add Role Group to open the
Add Role group Page as shown in the screenshot below.
9. In the Role Group Name field, enter the name that identifies the role group.
Note:
 Role Group Name is a string of 64 alpha-numeric characters.
 Special symbols hyphen and underscore are allowed.
10. In the Role Group Search Base field, enter the path from where the role group is
located to Base DN.
Figure 3-22. Add Role group Page
C G
ONFIGURATION ROUP
3-33