QUANTA QuantaGrid Series User Manual page 135

Product Regulatory Compliance Markings
This product is marked with the following Product Certification Markings:
Product Regulatory Compliance Markings
Regulatory Region
Compliance
cULus USA /
Listing Mark Canada
CE Mark Europe
installed.
3. Attach the covers to the chassis with the screws removed earlier,
and tighten them firmly.
4. Insert and lock the padlock to the system to prevent unauthorized
access inside the system.
5. Connect all external cables and the AC power cord(s) to the system.
A microprocessor and heat sink may be hot if the system has been
running. Also, there may be sharp pins and edges on some board and
chassis parts. Contact should be made with care. Consider wearing
protective gloves.
Danger of explosion if the battery is incorrectly replaced. Replace only
with the same or equivalent type recommended by the equipment
manufacturer. Dispose of used batteries according to manufacturer's
instructions.
The system is designed to operate in a typical office environment.
Choose a site that is:

Clean and free of airborne particles (other than normal room dust).

Well ventilated and away from sources of heat including direct
sunlight.

Away from sources of vibration or physical shock.

Isolated from strong electromagnetic fields produced by electrical
devices.

In regions that are susceptible to electrical storms, we recommend
you plug your system into a surge suppressor and disconnect
telecommunication lines to your modem during an electrical storm.

Provided with a properly grounded wall outlet.

Provided with sufficient space to access the power supply cord(s),
because they serve as the product's main power disconnect.
The rail racks are designed to carry only the weight of the server
system. Do not use rail-mounted equipment as a workspace. Do not
place additional load onto any rail-mounted equipment.
Heavy object. Indicates two people are required to safely handle the
system.
Marking