QUANTA QuantaGrid Series User Manual page 93

BMC
Alert Policy Tab
This page is used to configure the Alert Policy and LAN destination. You can add, delete or
modify an entry in this page.
The fields of the PEF Management – Alert Policy Tab are explained below.
Table 17: PEF Management - Alert Policy
I
TEM
Policy Entry #
Policy Number
Policy Configuration
Policy Set
Channel Number
Figure 3-27. PEF Management – Alert Policy
Displays Policy entry number for the newly configured entry (read-
only).
Displays the Policy number of the configuration.
To enable or disable the policy settings.
To choose any one of the Policy set values from the list.
 0: Always send alert to this destination.
 1: If alert to previous destination was successful, do not send alert to
this destination. Proceed to next entry in this policy set.
 2: If alert to previous destination was successful, do not send alert to
this destination. Do not process any more entries in this policy set.
 3: If alert to previous destination was successful, do not send alert to
this destination. Proceed to next entry in this policy set that is to a
different channel.

4: If alert to previous destination was successful, do not send alert to
this destination. Proceed to next entry in this policy set that is to a
different destination type.
To choose a particular channel from the available channel list.
C
ONFIGURATION
D
ESCRIPTION
G
ROUP
3-41