Restore Factory Defaults - QUANTA QuantaGrid Series User Manual

BMC
Step 4: upgrade firmware
Step 5: after Step 4, go to Step 2 and check if the setting is still preserved (if pre-
served then PASS else FAIL)
6. SSH
Step 1: Please go to add a new user and update the NEW SSH key.
Step 2: check if the user added SSH key updated
Step 3: go to Web-UI to check "SSH" to be preserved
Step 4: upgrade firmware
Step 5: after Step 4, go to Step 2 and check if the mode is still preserved (if preserved
then PASS else FAIL)
7. KVM
Step 1: Please modify the "Remote Session", "Mouse Mode" ,and "Virtual Media
Devices" setting by Web.
Step 2: check if the setting changed
Step 3: go to Web-UI to check "KVM" to be preserved
Step 4: upgrade firmware
Step 5: after Step 4, go to Step 2 and check if the setting is still preserved (if pre-
served then PASS else FAIL)
8. Services (supported from Grantley and Microserver platform)
Step 1: Please change the default value of each item by Web.
Step 2: check if the setting changed
Step 3: go to Web-UI to check "Services" to be preserved
Step 4: upgrade firmware
Step 5: after Step 4, go to Step 2 and check if the setting is still preserved (if pre-
served then PASS else FAIL)

Restore Factory Defaults

In MegaRAC GUI, this option is used to restore the factory defaults of the device firmware.
WARNING!
!
Please note that after entering restore factory widgets, other web pages and services will not
work. All open widgets will be closed automatically. The device will reset and reboot within a
few minutes.
M G
AINTENANCE ROUP
3-74