QUANTA QuantaGrid Series User Manual page 79

BMC
Table 10: Active Directory Settings Page (Continued)
I
TEM
Role Group ID
Group Name
Group Domain
Group Privilege
Add Role Group
Modify Role Group
Delete Role Group
Procedure:
Entering the details in Advanced Active Directory Settings Page
1. Click on Advanced Settings to open the Advanced Active Directory Settings Page.
2. In the Active Directory Settings Page, enter the following details.
3. Active Directory Authentication: To enable/disable Active Directory, check or
uncheck the Enable checkbox respectively.
Note:
If you have enabled Active Directory Authentication, enter the required information to access
the Active Directory server.
4. Specify the Domain Name for the user in the User Domain Name field. e.g. MyDo-
main.com.
The name that identifies the role group in the Active Directory.
Note:
 Role Group Name is a string of 64 alpha-numeric characters.
 Special symbols (hyphen and underscore) are allowed.
This name identifies the role group in Active Directory.
Note:
 Role Group Name is a string of 64 alpha-numeric characters.
 Special symbols (hyphen and underscore) are allowed.
The domain where the role group is located.
Note:
 Domain Name is a string of 255 alpha-numeric characters.
 Special symbols (hyphen and underscore) and dot are allowed.
The level of privilege to assign to this role group.
To add a new role group to the device.
To modify that role group. Alternatively, double click on the configured
slot.
To delete an existing Role Group.
Figure 3-17. Active Directory Settings Page
C
ONFIGURATION
D
ESCRIPTION
G
ROUP
3-27