Analogue Trunks - Mitel MiVoice 5000 Installing And Configuring

INSTALLING AND CONFIGURING MITEL EX CONTROLLER AND MITEL GX GATEWAY
If EX is declared with its FQDN, the corresponding SIP trunks must be declared with the same FQDN
as Proxy 1. Same for the IP address.
When the PRI slot is assigned (box ticked), a table appears at the bottom to define the type of signalling
(ETSI or QSIG) and the behaviour (master/slave).
Once the choice is made, click Apply Changes.
When the entry is complete, the menu displays the list of assignments and the Ready status of the
corresponding trunks:

ANALOGUE TRUNKS

These trunks must be connected to the FXO cards of EX Controller.
On the Web Admin
The configuration of analogue trunks is similar to that of digital trunks, with the same constraints.
Checkbox: FXO
The same SIP trunk can be assigned to different lines.
Declaration on the EX of the destination number of the analogue line:
• Access menu Telephony, tab
AMT/PTD/PBX/0173/0/9/EN
on EX Controller,
Services
12/2019 24