Mitel MiVoice 5000 Installing And Configuring page 19

INSTALLING AND CONFIGURING MITEL EX CONTROLLER AND MITEL GX GATEWAY
In the confirmation window, click OK.
After EX restarts, Exdeploy is stopped and MiV5000 automatically starts and configures its IP address
entered in the LAN configuration section.
This may take 2 or 3 minutes. The total is done and the local EX is configured.
Access MiV5000 Web Admin to verify that it is properly installed.
Menu Telephony Service>System>EX/GX Configuration lists the devices recognised:
:
AMT/PTD/PBX/0173/0/9/EN 12/2019 17