Description - Mitel MiVoice 5000 Installing And Configuring

INSTALLING AND CONFIGURING MITEL EX CONTROLLER AND MITEL GX GATEWAY
2

DESCRIPTION

The EX Controller platform is a box containing:
• Two virtual machines (one for deployment, the other for a Mitel Call Manger),
• Cards on the front panel allowing the connection of:
o
o
o
EX Controller can manage 1,500 subscribers (analogue, SIP or IP phones) and can be equipped with
8 additional cards:
PRI card:
DSP card: Required for FXS and FXO. This card must be installed in the first available slot after the
FXO card: Analogue trunk connection: up to 7 FXO cards (a total of 28 ports for analogue trunks).
FXS card: Analogue terminal connection: up to 7 FXS cards (a total of 28 ports for analogue
GX Gateway is an extension that can accommodate up to 8 FXS cards.
Only analogue terminals are supported by GX Gateway. Digital terminals and TDM DECT terminals are
not supported.
AMT/PTD/PBX/0173/0/9/EN
Analogue terminals,
Digital trunks,
Analogue trunks.
Digital trunk connection: up to 8 PRI cards. This card must be installed in the first slot of
the EX Controller.
PRI cards or in the first one if no PRI is installed.
This DSP card offers 4 conferences and the limitation of the maximum number of channels
depends on the codec, encryption and installed cards.
terminals).
12/2019 4