INSTALLING AND CONFIGURING MITEL EX CONTROLLER AND MITEL GX GATEWAY
In the LAN settings section, enter the IP addresses:
•
Of EX Controller (in the format @IP/Mask, example 10.10.10.22/24),
•
Of Call Manager (associated MiV5000 Server) (in the format @IP only, example 10.10.10.22),
•
The default gateway address (in the format @IP only, example 10.10.10.22).
Note: The WAN address is optional.
In the General settings section, fill in (optional):
•
The DNS server IP address,
•
The FQDN.
In the banner at the bottom of the screen, select the type of deployment (partial or full):
•
Partial, select Partial deploy,
•
Full, select Full deploy (duration; about 30 minutes).
Then click OK to deploy Call Manager on EX with the previously specified network settings.
In this example, partial deployment is chosen to split it into 2 phases:
•
Downloading the virtual machine,
•
The configuration phase.
This depends on the goal to be achieved or it is useful for analysing a problem.
AMT/PTD/PBX/0173/0/9/EN
12/2019
12