Set Mode Items; D Common - Icom IP730D Instruction Manual

6
SET MODE

Set mode items

The shaded items are also displayed in the Basic Set mode�
L Items or default values may be differ, depending on the transceiverʼs version or presettings. Ask your dealer for details.

D Common

Item
LOG CLEAR Deletes logs�
L Select "Clear," and then push [Call History]
FIRM UP Updates the transceiverʼs firmware.
L Select "YES," and then push [Call History]
L The transceiver automatically restarts�
L Updating the firmware takes approximately
RX Notify Vol� Sets the call or message received
notification volume.
Notify Vol� Sets the Notification Beep level.
Key-Touch Beep Selects whether or not to enable the Key-
touch beep�
Internal Mic Gain Sets the internal microphone sensitivity�
L Higher values make the microphone more
External Mic Gain. Sets the external microphone sensitivity�
L Higher values make the microphone more
VOX Selects whether or not to use the VOX
function�
The function automatically switches
between receive and transmit by
detecting your voice�
VOX Threshold* 1 Sets the VOX gain level�
L Lower values make the VOX function more
VOX Delay* Sets the period of time the transceiver
1
continues transmitting after the user
stops speaking, and then the VOX
switches to receive�
L If you set the time too short, a pause in a
* Displayed only when "Bluetooth Mic," or "Earphone Mic" is selected in the "VOX" item.
1
Description
to delete�
to update the firmware.
10 minutes�
sensitive to your voice�
sensitive to your voice�
sensitive to your voice�
conversation may be regarded as the end
of conversation, and the transceiver will
start receiving, even as the conversation
continues�
Option/range
– – –, Clear
NO or YES
0 ~ 32
0 ~ 32
ON or OFF
–12 dB ~ 12 dB (in 4 dB step)
–12 dB ~ 12 dB (in 4 dB step)
OFF, Bluetooth Mic, or
Earphone Mic/Headset
1 ~ 10
0�5 ~ 3�0
6-3
Default
– – –
NO
10
10
ON
0 dB
0 dB
OFF
5
1�0