Section 2 Before Using; Panel Description; D Front, Top And Side Panels; D Status Indicator - Icom IP730D Instruction Manual

2
BEFORE USING

Panel description

D Front, top and side panels

Rotary Selector
Antenna
Connector
[Emer]
[PTT]
Speaker
[Sub PTT]
[Side 1]
[Side 2]
[Address]
[Call History]

D Status indicator

• Lights red:
• Lights green:
• Lights yellow:
[VOL]
Status
indicator
Multi-
connector
Microphone
Function
display
[FUNC]
[CLR/Lock]
[▲]/[▼]
Transmitting�
Receiving or squelch is open�
Receiving and transmitting in
the Full-Duplex mode�

D Multi-connector

Connects to an optional speaker microphone or
headset�
L Turn OFF the transceiver before attaching or detaching
the microphone�
CAUTION: DO NOT use the transceiver without the
connector cover or optional equipment attached�
The transceiver meets IP67 requirements for dust-
tight and waterproof protection only when the
connector cover or the optional speaker microphone
is attached� See page 7-4 for the usable speaker
microphones�
1

D About the assignable key functions

Functions described on page 5-10 may be assigned to
the [Sub PTT], [Side 1], and [Side 2] keys, depending
on a presetting� Hold down or push these keys to use
the assigned functions�
You can also assign the functions in the Detailed Set
mode (p� 6-5)�
2-2
3
4
2
CAUTION: Firmly attach to
the Multi connector, but do not
overtighten� A loose connection
will allow water intrusion into
the connector� Over-tightening
the connection can damage the
transceiver�