Using The Emergency Call Function - Icom IP730D Instruction Manual

5
OTHER FUNCTIONS

Using the Emergency call function

You can receive or transmit Emergency Call if the function is enabled�
Transmitting:
The instruction is for when the function is enabled� Ask your dealer for details�
1� Hold down [Emer] until "Emergency" is displayed�
• An alarm periodically sounds�
L If the Surveillance function is enabled, no alarm sounds�
2� Wait for an answer-back�
• When the transceiver receives an answer-back, the alarm stops, and the Status indicator
lights green�
L Turn OFF the transceiver to cancel the emergency call�
L The transceiver automatically transmits a repeat Emergency call until it receives an
acknowledgement, or until a user turns OFF the transceiver�
Receiving:
1� "Emergency" is displayed and the alarm periodically sounds�
L If the Surveillance function is enabled, no alarm sounds�
2� While holding down [PTT], talk into the microphone�
• While holding down [PTT], the Status indicator lights red�
• The alarm stops�
• Returns to the Standby screen when you release [PTT]�
NOTE: The Emergency function may not properly work, depending on the
surrounding environment such as obstructions, weather condition, and so on�
Icom is not responsible for the destruction or damage caused by using the
Emergency Call function�
5-5