Icom IP730D Instruction Manual page 36

6
SET MODE
Set mode items (Continued)
The shaded items are also displayed in the Basic Set mode�
L Items or default values may be differ, depending on the transceiverʼs version or presettings. Ask your dealer for details.
D Common
Item
Man Down* Selects whether or not to enable the Man
2
Down function�
The transceiver enters the Emergency
mode when it is tilted past the preset
angle for a certain time. (p. 5-6)
Lone Worker* Selects whether or not to enable the Lone
2
Worker function�
The transceiver enters the Emergency
mode when no operation occurs for a
certain time. (p. 5-7)
Stationary Selects whether or not to enable the
Detection* 2 Stationary Detection function�
The transceiver enters the Emergency
mode when it is detected as being
stationary (no motion) for a certain time.
(p. 5-8)
Motion Detection* 2 Selects whether or not to enable the
Motion Detection function.
The transceiver enters the Emergency
mode when it is continuously moves for a
certain time. (p. 5-8)
Recording Selects whether or not to enable the
Voice Recorder function. (p. 5-9)
Record Call type* 3 Selects a type of call to record�
Delete Recording* 3 Deletes recorded audio�
L Select "Clear," and then push [Call History]
Noise Canceller Selects whether or not to enable the
Noise Cancelling function�
PTT Lock Selects whether or not to enable the PTT
function�
The function inhibits transmission by the
internal PTT�
Operate Inhibit Selects whether or not to inhibit the
operation except using [VOL]�
Sub PTT Push* Sets the function to execute when you
4
push [Sub PTT]�
Sub PTT Hold* 4 Sets the function to execute when you
hold down [Sub PTT]�
* Displayed only when the Emergency Call function is enabled by your dealer.
2
* 3 Displayed only when "ON" is selected in the "Recording" item.
Description
to delete�
Option/range
OFF or ON
OFF or ON
OFF or ON
OFF or ON
OFF or ON
Individual Call or All
– – – or Clear
ON or OFF
OFF or ON
OFF or ON
Null, Zone, Monitor, Talk Around,
Message, One Touch, or
Surveillance
Null, Zone, Monitor, Talk
Around, Message, One Touch,
Surveillance, or AquaQuake
6-4
Default
OFF
OFF
OFF
OFF
OFF
Individual
Call
– – –
ON
OFF
OFF
Null
Null