D The Stationary Detection Function; D The Motion Detection Function - Icom IP730D Instruction Manual

5
OTHER FUNCTIONS
Using the Emergency Call function (Continued)
The transceiver enters the Emergency mode through
the following functions, depending on a presetting:

D The Stationary Detection function

When the transceiver is detected as being stationary
(no motion) for the ON Timer preset time�
L If a user moves the transceiver during the
Reminder Timer set time, the Emergency mode is
canceled�
Enters the
Emergency mode.
ON Timer Reminder Timer
No motion is
detected.
Time
NOTE: The Stationary Detection function may
not properly work, depending on the surrounding
environment such as obstructions, weather condition,
and so on�
Icom is not responsible for the destruction or damage
caused by using the Stationary Detection function�
Sends an
Emergency call.
Emergency Timer
Stationary
Sensitivity
If moving during the Reminder
Timer, the Emergency mode
is canceled.

D The Motion Detection function

When the transceiver continuously moves for the ON
Timer preset time�
L If a user holds down [Emer] for the Emer SW OFF
Timer (Sec) set time, before the Reminder Timer
set time expires, the Emergency mode is canceled�
Enters the
Emergency mode.
ON Timer
Motion is
detected.
NOTE: The Motion Detection function may not
properly work, depending on the surrounding
environment such as obstructions, weather condition,
and so on�
Icom is not responsible for the destruction or damage
caused by using the Motion Detection function�
5-8
Sends an
Emergency call.
Reminder Timer Emergency Timer
[Emergency]
Time
If holding down [Emergency]
during Reminder Timer, the
Emergency mode is
canceled.
Motion
Sensitivity