Svp Rear Panel; Service Processor (Windows 10 Enterprise) Hardware Specifications - Hitachi SVP F 00 Series Manual

SVP rear panel

The only ports used at the rear panel of the physical SVP are the power socket and the
four LAN ports. The following ports connect to your IP network, the management
console PC, and the user LAN port on each storage system controller.
1
2
3
4
Note: The SVP running Windows 10 operating system does not provide an
option to disable Spanning Tree Protocol (STP). If your network has BPDU
enabled to prevent loops, connect the user LAN port on controllers 1 and 2 to
an Ethernet switch that is also connected to the LAN1 port on the SVP.
Note: After the Initial Startup Wizard is complete, the SVP can be used in non-
bridge mode. In this mode, the cables can be removed from SVP ports LAN3
and LAN4 and attached to switches. For more information, contact customer
support.
Service Processor (Windows 10 Enterprise) hardware
specifications
The following table lists the hardware specifications for the service processor (Windows
10 Enterprise) provided by Hitachi Vantara.
Chapter 3: Physical SVP (Windows 10 Enterprise) hardware description
Table 6 SVP (Windows 10 Enterprise) rear panel
Item
Service Processor Technical Reference
Description
Management (DKC CTL1) - LAN3 port
Management (DKC CTL2) - LAN4 port
Maintenance - LAN2 port
Management (User) - LAN1 port
SVP rear panel
23