Reallocating Automatically Allocated Port Numbers - Hitachi SVP F 00 Series Manual

Reallocating automatically allocated port numbers

You can reassign the port numbers automatically allocated to the storage system. When
the port numbers assigned to the storage system are used in other applications, the port
numbers are reallocated to the ports.
Note:
Stop the service of the storage system to be reallocated, and then perform
■
reallocation. If the service is performed without stopping it, stop the
service of the target storage system in the Storage Device List window,
and then start the service.
The DeviceJettyStart and DeviceJettyStop ports that are allocated when the
■
storage system service is started are not reallocated.
When the function using the ports is disabled, delete the allocated port
■
numbers.
Procedure
1. Log out of Hitachi Device Manager - Storage Navigator from the storage system to
be reallocated.
2. Stop the service of the storage system.
3. On the SVP, start a Windows command prompt as an Administrator.
4. Change the current directory to the directory where the tool exists. Run the
following command: C:\Mapp\wk\Supervisor\MappIniSet
\MappPortManageRenum.bat_[Serial number](arbitrary)
The _ character indicates a space. The values in [ ] indicates a parameter.
When the [Serial number] is omitted, the command is performed for storage
systems running firmware version 83-03-01-xx/00 or later.
5. The confirmation message for reallocation is displayed. To continue the processing,
enter y, and then press Enter. To cancel the processing, enter n, and then press
Enter.
6. Close the command prompt.
7. Start the services of the reallocated storage system.
Chapter 14: Changing and initializing SVP port numbers
Tip: In this command, C:\MAPP indicates the installation directory of the
storage management software and SVP software. If the installation
directory is not C:\MAPP, replace C:\MAPP with the appropriate
installation directory.
Service Processor Technical Reference
Reallocating automatically allocated port numbers
221