Chapter 15: Editing The Storage Device List - Hitachi SVP F 00 Series Manual

Chapter 15: Editing the Storage Device List

If you change the storage system IP address or the maintenance password, edit the
Storage Device List to reflect the change.
Procedure
1. If your network uses the spanning tree protocol (STP) Bridge Protocol Data Unit
(BPDU) guard on your network, perform the following Registry changes. Otherwise,
skip to step 2:
a. If you use the physical SVP supplied by Hitachi Vantara, verify the following
connections.
b. If you use the physical SVP supplied by Hitachi Vantara, remove the cable from
the LAN1 port on the SVP.
c. Click Start > Run.
d. In the Run dialog box, type regedit, and then click OK.
e. Go to the following key: HKEY_LOCAL_MACHINE\SYSTEM
\CurrentControlSet\Services\BridgeMP
f. Right-click New > DWORD (32-bit Value), and then type DisableSTA.
Chapter 15: Editing the Storage Device List
Service Processor Technical Reference 227