Physical Svp Lan Port Assignment - Hitachi SVP F 00 Series Manual

Physical SVP LAN port assignment

The following figure shows a physical SVP in non-bridged environment.
For information about configuring an SVP for a non-bridged network environment, see
Operating the physical SVP in a non-bridged network configuration (on page 35) .
Physical SVP LAN port assignment
The LAN port assignments on the physical SVP should match the ones in the following
figure.
The IPMI port is an IPMI-dedicated port connected to the BMC in the SVP and is invisible
from the Windows operating system. For security reasons, the IPMI port cannot be
enabled in BIOS setting and is not supported for the SVP.
Chapter 4: Installing the Hitachi Vantara-supplied SVP
Service Processor Technical Reference 27