Hyper-Threading; Configuring The Virtual Svp - Hitachi SVP F 00 Series Manual

SVP Guest OS (maximum one DKC per SVP guest OS)
Two virtual CPUs
■
One virtual network adapter
■
4 GB RAM
■
120 GB disk space
■
One of the following 64-bit operating systems:
■
For VMware ESXi 6.0.0: Windows 7 Professional (64-bit)
●
For VMware ESXi 6.0 U2: Windows 7 Professional Service Pack 1 (64-bit)
●
Miscellaneous
WinZip
■

Hyper-threading

To support a virtual SVP, verify that hyper-threading is active for the ESXi server and VM
guest host.
Note: Hyper-threading is enabled by default.

Configuring the virtual SVP

After preparing the environment, activating hyper-threading on both the ESXi server and
VM guest host, and verifying the configuration layout, use the following procedure to
configure the virtual SVP.
Procedure
1. Create a Windows 7 Professional x64 Service Pack 1 on the ESXi host.
2. Verify the virtual network connection is properly assigned to the appropriate virtual
machine network.
Chapter 7: Installing the SVP software on a VMware ESXi host
Service Processor Technical Reference
Hyper-threading
109