Hitachi SVP F 00 Series Manual page 243

11. To update the firmware of the storage system being registered, check Firmware
(Storage System). Otherwise, leave it unchecked.
12. To register additional storage systems, repeat steps 6 through 10.
13. Click Apply in the target storage system list window.
14. To upgrade the firmware, click Confirm when the Update software and firmware
window opens.
The Run Update Firmware window opens and the upgrade starts automatically.
15. When the following screen opens, use the status bar under the Software (Storage
Navigator) column to monitor the update status. The following table lists the status
conditions.
Chapter 16: Deleting and registering the storage system
Service Processor Technical Reference
Registering the storage system on the SVP
243