Setting method
Setting item
Reverse insertion check (DIR.CHK)
● "DIR.CHK" (Reverse insertion check) takes effect only when the operation mode is set to "Edge
detection mode (EDGE)".
7.2.10 Key Lock Function Selection (
This function allows you to configure settings to activate key lock automatically when five
minutes have elapsed since key operation was performed last time.
The unlocking method for automatic key lock is the same as for manual key lock.
WUME-HGT-6
7.2 Advanced Settings (
Setting range
Check ON (ON)
Check OFF (OFF)
)
)
Default value
ON
7-47