7-2
Perform teaching "1-point teaching" (default) to set the GO range.
"5.3.4 Teaching"
7-3
Select and set output setting "3-value output". (Default)
"7.2.4 External Outputs (
7-4
Select and set output operation setting "N.O. (Normally Open)". (Default)
"6.4.10 Output Operation (
8.
Start measurement
Measurement is started. Check the value measured by the controller and the judgment value.
"5.1.1 Functions of Operation Pad and Display Unit"
9.
Fine adjustment
To change the GO range, change the HIGH set value and LOW set value to any desired values.
"6.4.1 HIGH Set Value (
"6.4.2 LOW Set Value (
WUME-HGT-6
5.2 Flow of Operations up to Measurement Startup
)"
)"
)"
)"
5-7