Table of Contents
Advertisement
1.6 Product Version and Functions
1.6 Product Version and Functions
The following functions are added to the HG-TC□ series controllers and HG-T□ series sensor
heads manufactured in November 2020 onwards.
Added function
Assigned edge detection mode
Tab cancellation function
Hold state output
Measured value reversal selection
function
● The controllers and sensor heads manufactured in October 2020 or earlier do not support
the above functions. Please note this point.
■
<How to check manufacturing year and month>
Check the manufacturing lot No. shown in the following figure.
■
<How to interpret the manufacturing lot No.>
1-12
Description
Operation mode
Hold setting
External output
Measured value reversal
Remarks
"6.3.1 Operation Mode (
"7.2.1 Hold Settings (
"7.2.4 External Outputs
(
)"
"7.2.13 Reverse of Measured Value
(
)"
WUME-HGT-6
)"
)"
Advertisement
Table of Contents
