Table of Contents
Advertisement
Judgment filter
Judgment filters can make measurement less affected by dirt and other foreign objects
adhering to the glass cover of the sensor head emitter or receiver.
For judgment filter "3", only when at least three consecutive pixels appear in the light
interception part of the sensor head receiver, the receiver is judged to be in a light interception
state and the edge position (measured value) is calculated. When dirt adheres to the emitter or
receiver, measurement can be continued unless at least three consecutive pixels appear in the
light interception part.
If the filter value is too large, small objects cannot be measured.
For judgment filter "3"
1.
Hold down the
increments in the circle meter increases.)
WUME-HGT-6
5.5 Settings on the Base Screen (Using Shortcut Keys)
key and
key simultaneously for 2 seconds. (The number of lit
5-43
Advertisement
Table of Contents
