Starting The Serveraid Manager Program In Netware; Starting The Serveraid Manager Program In Os/2 - IBM Netfinity ServeRAID-4H Ultra160 User Reference

Figure 14. Information mode window

Starting the ServeRAID Manager program in NetWare

To start the ServeRAID Manager program in NetWare:
1. From the NetWare console, type:
2. Press Enter.
The program starts in Information mode and a window similar to the previous
window opens.

Starting the ServeRAID Manager program in OS/2

To start the ServeRAID Manager program in OS/2:
1. Change to the directory where you installed the ServeRAID Manager program
2. Press Enter.
LOAD RAIDMAN
by typing the following:
cd \RaidMan
Chapter 2. Installing and configuring ServeRAID controllers
57