IBM Netfinity ServeRAID-4H Ultra160 User Reference page 38

Figure 5. Configuration mode window
® ®
24
IBM Netfinity User's Reference: ServeRAID
Follow the instructions in the right panel to create logical drives on your
ServeRAID controller. If you do not want to configure your ServeRAID
controller, click Cancel. This will switch the program from Configuration mode
to Information mode.
v If the ServeRAID Manager program detects that all ServeRAID controllers in
the server are configured, the program starts in Information mode and a
window similar to the following opens.
™
-4H Ultra160 SCSI Controller