IBM Netfinity ServeRAID-4H Ultra160 User Reference page 46

Scsi controller
Table of Contents

Advertisement

Figure 12. Configuration summary window
16. Click Apply to accept and save the configuration. The configuration is saved in
17. If you have multiple controllers, for each controller repeat steps 1 on page 27
18. When you have completed configuration, you can change to Information mode
19. Restart the server.
20. Continue with "Step 4: Installing device drivers" on page 33 to install the
®
®
32
IBM
Netfinity
User's Reference: ServeRAID
Note: To change the configuration, click Modify arrays or Modify logical
drives.
the ServeRAID controller and on the physical drives.
through step 16.
and change controller settings. See "Using Information mode" on page 33 for
more information. If you do not want to change any settings, exit the
ServeRAID Manager program and remove the CD from the CD-ROM drive.
ServeRAID device driver while installing your operating system.
Note: If you are configuring your startup (boot) ServeRAID controller, you
must install the device driver while installing the operating system.
-4H Ultra160 SCSI Controller

Advertisement

Table of Contents
loading

Table of Contents