Validating A Cluster - IBM Netfinity ServeRAID-4H Ultra160 User Reference

Figure 27. Configure for clustering window
5. Click Shared or Non-shared for the logical drive you have just defined.
6. Select the merge group number you want to use for the logical drive you just
7. Click OK.
8. If you are using Windows NT 4.0, continue with "Creating a ServeRAID disk

Validating a cluster

Use this feature to determine if your cluster is configured correctly.
Note: You must have the ServeRAID Manager program installed on all servers in
To validate a cluster, do the following:
1. In the Main Tree, click a server in the cluster.
2. Click Actions → Validate cluster. A window similar to the following opens.
defined.
resource on a Windows NT 4.0 ServeRAID cluster" on page 88.
If you are using Windows 2000, continue with "Creating a ServeRAID disk
resource on a Windows 2000 ServeRAID cluster" on page 96.
the cluster for this feature to work.
Chapter 10. Monitoring and updating an IBM ServeRAID Cluster Solution
103