IBM Netfinity ServeRAID-4H Ultra160 User Reference page 146

Basic and Extended Configuration Status Register Codes
BCS ECS Explanation and possible recovery action
Code Code Explanation:The ServeRAID controller is not functioning properly.
not in not in
Action:Have the system serviced.
table table
00 01 Explanation:Invalid flash configuration.
Action:Start the IBM ServeRAID Support CD and follow the instructions that appear on the
screen.
If no instructions appear or if the problem persists, have the system serviced.
00 02 Explanation:Invalid NVRAM configuration.
Action:Start the IBM ServeRAID Support CD and follow the instructions that appear on the
screen.
If no instructions appear or if the problem persists, have the system serviced.
00 03 Explanation:Invalid flash and NVRAM configuration.
Action:Start the IBM ServeRAID Support CD and follow the instructions that appear on the
screen.
If no instructions appear or if the problem persists, have the system serviced.
01 08 Explanation:No configuration was found in drives, or Online/Rebuild drives are not responding.
Action:Press F4, F5, F7, or F10.
01 18 Explanation:No configuration was found in drives, or Online/Rebuild and Hot-Spare/Standby
Hot-Spare drives are not responding.
Action:Press F4, F5, F7, or F10.
01 28 Explanation:No configuration was found in drives, or Online/Rebuild and Ready/Standby drives
are not responding.
Action:Press F4, F5, F7, or F10.
01 38 Explanation:No configuration was found in drives, or Online/Rebuild, Hot-Spare/Standby
Hot-Spare, and Ready/Standby drives are not responding.
Action:Press F4, F5, F7, or F10.
01 48 Explanation:No configuration was found in drives, or Online/Rebuild drives are not responding
and unidentified drives were found.
Action:Press F4, F5, F7, or F10.
01 58 Explanation:No configuration was found in drives, or Online/Rebuild and Hot-Spare/Standby
Hot-Spare drives are not responding and unidentified drives were found.
Action:Press F4, F5, F7, or F10.
01 68 Explanation:No configuration was found in drives, or Online/Rebuild and Ready/Standby drives
are not responding and unidentified drives were found.
Action:Press F4, F5, F7, or F10.
01 78 Explanation:No configuration was found in drives, or Online/Rebuild, Hot-Spare/Standby
Hot-Spare, and Ready/Standby drives are not responding and unidentified drives were found.
Action:Press F4, F5, F7, or F10.
® ®
132
IBM Netfinity User's Reference: ServeRAID
™
-4H Ultra160 SCSI Controller