IBM Netfinity ServeRAID-4H Ultra160 User Reference page 66

Installing on OpenServer
Note: This version of the ServeRAID Manager program supports up to 8
To install or remove the ServeRAID Manager package, you must have root
privileges.
Note: If ServeRAID Manager is installed on your system, you must remove this
To install the ServeRAID Manager program for OpenServer, do the following.
Note: The ServeRAID Manager requires that you install the SCO OpenServer JDK
1. Insert the IBM ServeRAID Support CD into the CD-ROM drive.
2. Mount the CD-ROM by typing:
3. Then, type (all on the same line):
4. Press Enter.
5. When the installation is complete, type:
6. Press Enter. You can now remove the CD from the CD-ROM drive.
Installing on UnixWare
Notes:
1. To use the ServeRAID Manager program with UnixWare, you must have either
2. To install or remove the ServeRAID Manager package you must have root
3. If the ServeRAID Manager program is already installed on your server, you must
® ®
52
IBM Netfinity User's Reference: ServeRAID
ServeRAID controllers when using OpenServer.
version before upgrading. All customization files (such as Managed system
tree nodes, Notification list) are saved and used in the upgrade.
To remove the ServeRAID Manager program from OpenServer, type the
following command:
pkgrm RaidMan
(or JRE). You can download the JDK and JRE from the SCO Web site:
http://www.sco.com/java/
cd /
Then, press Enter.
mkdir cdrom
Then, press Enter.
mount -r -f HS,lower /dev/cd0 /cdrom
Then, press Enter.
pkgadd -a /cdrom/programs/openserv/manager/RaidMan.adm -d
/cdrom/programs/openserv/manager/RaidMan.ds
umount /cdrom
the Java Runtime Environment (JRE) or the Java Development Kit (JDK)
installed on your server.
privileges.
remove this version before upgrading. All customization files (such as Managed
system tree nodes, Notification list) are saved and used in the upgrade. To
remove the ServeRAID Manager program from UnixWare, type the following
command:
™
-4H Ultra160 SCSI Controller