IBM Netfinity ServeRAID-4H Ultra160 User Reference page 68

Installing IPSSEND for Windows 2000, Windows NT 4.0, NetWare,
or OS/2
To install these programs for Windows NT, Windows 2000, NetWare, or OS/2:
1. Start the server.
2. After the operating system starts, insert the IBM ServeRAID Support CD into the
3. If you are using NetWare, go to step 5 If you are using Windows NT, Windows
4. Press Enter.
5. Copy the IPSSEND.EXE file to your hard disk drive by typing one of the
6. Press Enter. Remove the CD from the CD-ROM drive.
Installing IPSSEND for Linux
To install these programs for Red Hat Linux 6.1 (or later):
1. Start the server.
2. After the operating system starts, insert the IBM ServeRAID Support CD into the
3. Mount the CD by typing the following at the console:
4. Press Enter; then, type:
5. Press Enter; then, type:
® ®
54
IBM Netfinity User's Reference: ServeRAID
CD-ROM drive.
2000 or OS/2, create an IPSADM directory on your hard disk. To do this, go to
the operating system command prompt and type:
md c:\ipsadm
where c is the drive letter of the drive where Windows NT, Windows 2000, or
OS/2 is installed.
following at the command prompt:
v For Windows NT, type:
copy z:\programs\winnt\cmdline\nt4_0\ipssend.exe c:\ipsadm
v For Windows 2000, type:
copy z:\programs\winnt\cmdline\win2k\ipssend.exe c:\ipsadm
v For NetWare, from a DOS prompt type:
copy z:\programs\netware\cmdline\ipssend.nlm c:\nwserver
v For OS/2, type:
copy z:\programs\os2\cmdline\ipssend.exe c:\ipsadm
Notes:
a. Where z is the drive letter for the CD-ROM drive that contains the IBM
ServeRAID Support CD and c is the drive letter where Windows NT,
Windows 2000, NetWare, or OS/2 is installed.
b. These instructions assume that you installed NetWare in the NWSERVER
directory.
CD-ROM drive.
mount -t iso9660 -o ro /dev/cd0 /mnt
Notes:
a. where /dev/cd0 is the specific device file for the CD-ROM block device. If
you have more than one CD-ROM, you must replace /dev/cd0 with the
specific name of the CD-ROM you want to use.
b. If you currently have another device mounted on /mnt, you must create a
new directory and substitute its name for /mnt in these instructions.
cp /mnt/programs/linux/cmdline/ipssend /usr/bin
chmod 700 /usr/bin/ipssend
™
-4H Ultra160 SCSI Controller