IBM Netfinity ServeRAID-4H Ultra160 User Reference page 69

Scsi controller
Table of Contents

Advertisement

6. Press Enter; then, unmount the CD-ROM by typing the following:
umount /mnt
7. Press Enter. Remove the CD from the CD-ROM drive.
Installing IPSSEND for OpenServer
To install these programs for OpenServer 5.0.5:
1. Start the server.
2. After the operating system starts, insert the IBM ServeRAID Support CD into the
CD-ROM drive.
3. Mount the CD by typing the following at the console:
mount -f ISO9660 -o ro,lower /dev/cd0 /mnt
Notes:
a. where /dev/cd0 is the specific device file for the CD-ROM block device. If
you have more than one CD-ROM, you must replace /dev/cd0 with the
specific name of the CD-ROM you want to use.
b. If you currently have another device mounted on /mnt, you must create a
new directory and substitute its name for /mnt in these instructions.
4. Press Enter; then, type:
cp /mnt/programs/openserv/cmdline/ipssend /usr/bin
5. Press Enter; then, type:
chmod 700 /usr/bin/ipssend
6. Press Enter; then, unmount the CD-ROM by typing the following:
umount /mnt
7. Press Enter. Remove the CD from the CD-ROM drive.
Installing IPSSEND for UnixWare
To install these programs for UnixWare 7.1:
1. Start the server.
2. After the operating system starts, insert the IBM ServeRAID Support CD into the
CD-ROM drive.
3. Mount the CD by typing the following at the console:
mount -F cdfs -r /dev/cdrom/cdromdevicefile /mnt
Notes:
a. where cdromdevicefile is the specific device file for the CD-ROM block
device. Look in the /dev/cdrom directory to determine what cdromdevicefile
is on your server, for example, c0b0t010.
b. If you currently have another device mounted on /mnt, you must create a
new directory and substitute its name for /mnt in these instructions.
4. Press Enter; then, type:
cp /mnt/programs/unixware/cmdline/ipssend /usr/bin
5. Press Enter; then, type:
chmod 700 /usr/bin/ipssend
6. Press Enter; then, unmount the CD-ROM by typing the following:
umount /mnt
7. Press Enter. Remove the CD from the CD-ROM drive.
Chapter 2. Installing and configuring ServeRAID controllers
55

Advertisement

Table of Contents
loading

Table of Contents