IBM Netfinity ServeRAID-4H Ultra160 User Reference page 78

Figure 16. Configure controller for clustering window
9. Click OK.
10. In the Main Tree, click the second ServeRAID controller that you want to
11. Click
® ®
64
IBM Netfinity User's Reference: ServeRAID
5. Repeat step 2 on page 63 through step 4 on page 63 for the second
ServeRAID controller.
6. In the Main Tree, click the first ServeRAID controller that you want to
configure.
7. Click on the tool bar. The Configure controller for clustering window
opens.
8. Fill in the following information.
Notes:
a. The controller name and partner name are case sensitive.
b. If your configuration will contain multiple ServeRAID controllers pairs, each
controller name must be unique.
Controller name
Enter a name to identify the first controller, for example, Controller A.
Partner name
Enter a name that you will use to identify the second controller, for
example, Controller B.
SCSI initiator IDs
The system presets these IDs to 7. Set each ID to 6 for shared
channels.
Note: The ServeRAID Manager program does not permit you to enter
numbers other than 6 and 7.
configure.
on the tool bar. The Configure controller for clustering window
opens.
™
-4H Ultra160 SCSI Controller