IBM Netfinity ServeRAID-4H Ultra160 User Reference page 118

Figure 28. ServeRAID cluster validation window
3. From the Node B pull-down menu, select your second server.
4. Click Start. The ServeRAID Manager program scans both systems to verify the
5. If you want to stop the validation before it completes, click Cancel. Otherwise, if
6. To view the problem report events in an easy-to-read window, double-click an
7. To save the contents of the Problems found message field, click Save. A Save
8. Click Done to exit the Cluster validation window. If the ServeRAID cluster
® ®
104
IBM Netfinity User's Reference: ServeRAID
The server you selected in step 1 on page 103 is listed in the Node A box.
Note: You cannot change the Node A system in the Cluster validation window.
To select a different system, click Cancel to return to the Main Tree.
Note: The Node B system defaults to the first system in the Main Tree other
than the Node A system. If there are no remote systems in the Main
Tree, click Cancel to return to the Main Tree and add a remote system.
You can also type in the Node B name.
ServeRAID cluster configuration. The progress indicator reports the progress of
the validation.
the ServeRAID Manager program finds problems with the ServeRAID cluster
configuration, it reports the problems in the Problems found message field. If
there are no problems with the ServeRAID cluster configuration, the message
field reports only the cluster pairings found.
event in the Problems found message field.
as window opens. Specify the file name for the message field log and click OK.
configuration has problems, fix the problems; then, use Validate cluster again.
™
-4H Ultra160 SCSI Controller