Table of Contents
Advertisement
All additional devices installed by the operator must be equipped with the stipulated
safety devices.
This is your responsibility being the operating company!
1.6
Qualification of personnel
1.6.1
Target group
This manual is addressed to
the operating companies,
the operators,
the maintenance personnel.
Therefore, the warning notes refer to both, operation and maintenance personnel of the drilling
machine.
Lock the main switch. This will prevent it from being used by unauthorized persons.
Obligations of the operating company
train the personnel,
instruct the personnel in regular intervals (at least once a year) on
- all safety regulations relevant to the machine,
- its operation and
- generally accepted engineering standards.
check the personnel's knowledge level,
document the training/instruction,
have attendance at the training/instruction confirmed by signature and
check whether the personnel is working in a safety and risk-conscious manner and follow-
ing the operating instructions.
define and document the inspection deadlines for the machine in accordance with § 3 of the
Factory Safety Act and perform an operational risk analysis in accordance with § 6 of the
Work Safety Act.
Obligations of the operator
have obtained a training regarding the handling of the drilling machine,
know the function and mode of action,
before taking the machine in operation
- have read and understood the operating manual,
- be familiar with all safety devices and instructions.
Additional requirements apply for work on the following machine components:
Electrical parts or operating agents: shall only be performed by an electrician or under the
guidance and supervision of an electrician.
1.7
User positions
The operator position is in front of the drilling machine.
1.8
Safety devices
Use the drilling machine only with properly functioning safety devices. Stop the drilling machine
immediately, if a safety device fails or is faulty or becomes ineffective. It is your responsibility!
If a safety device has been activated or has failed, the drilling machine must only be used if you
the cause of the fault has been eliminated,
you have verified that there is no danger to personnel or objects.
Safety
Version 1.0 - 2020-09-04
Safety devices on page 9
Translation of original instructions
DX17E
EN
9
Advertisement
Table of Contents
