Figure 3-9. Ribbon Refill Cartridge Release Tab
Ribbon Refill Cartridge
Installation
Operation
1. Perform Degree II preventive maintenance (see Section 4).
2. Remove the rubber bands that keep the ribbon comb in place and slacken the
ribbon until a free length of 40 em (16 in.) is obtained. Save the comb for use
during cartridge removal.
3. Grasp the ribbon refill cartridge and fit the left end into the cartridge holder.
Lower the right end and lock it (Figure 3=10).
Figure 3-10. Installing the Ribbon Refill Cartridge
3-9
5182
CW99-00A
I