Load External Media; Load Ribbon - Honeywell PC42t User Manual

Chapter 1 — About the Printer

Load External Media

You can place the media supply, such as fanfold tickets or tags, behind
the printer. You need to purchase an external media holder separately.
Note: Make sure to protect the media from direct sunlight and from
dust, dirt, or other foreign particles that can impair the printout quality or
cause unnecessary wear to the printhead.
1 Place the media behind the printer.
2 Feed the media into the printer through the external media feed slot.
3 Thread the media through the printer and adjust the media holders

Load Ribbon

You need to use thermal transfer ribbon to print on thermal transfer
media. Make sure to select ribbon that matches the face materials of the
media to obtain the best durability and print quality.
Note: The PC42t can only use ribbon that is "ink out," which means that
the ribbon is loaded with the inked side (the dull side) facing out.
10
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
and sensor as you would for media that loads inside the printer.
V10 CONSUMIBLES S.L.
External media
feed slot
PC42t Desktop Printer User Guide