Honeywell PRU0901 Manual page 41

Error Codes
Table A-2 (Cont)~ Corrective Operator Actions
Error Code
Operator Action
a
aIfthis incident occurs, carry out corrective action(s) and do the following:
- Press
ALARM RESET button
- PressSTOP/STARTbutton.
If the incident is still present, refer
to
Section 4.
bIfthis incident occurs, do
the
following:
- Open main circuit breaker and then close both circuit braakers.
- Press ALARM RESET button.
- PressSTOP/STARTbutton.
If the incident is still present, refer to Section 4.
A-4
5182
CW99-00A