Table of Contents
Advertisement
Print Belt Installation
It is assumed that the ribbon cassette assembly is removed, the belt unit is
open, and the belt pulley is in the released position.
1. Install the belt container assembly on the belt unit.
2. Position the print belt by pushing the belt container downwards, first at
the left and then at the right.
3. Tighten the print belt by means of the lever (see Print Belt Removal,
step 2) and remove the container.
Emergency Conditions
Operation
If an emergency condi tion (smoke or fire) occurs, set the circuit breakers to
the OFF position immediately.
3-11
CW99-00
Advertisement
Table of Contents
